wpeE2.jpg (2756 bytes) wpeE3.jpg (7031 bytes) wpeE4.jpg (4745 bytes) wpe48.jpg (6772 bytes)

wpeE0.jpg (5476 bytes)
Pond and Water Garden Supplies.com

AquaFalls
Waterfall kit including an mechanical filter, biological filter and waterfall form all-in-one!

wpe13.jpg (14586 bytes)

Aquafalls units are available in 3 different sizes, each unit provides complete mechanical and biological filtration as well as a housing for the beginning of a waterfall or stream.  Simply bury in the ground for minimal water drop or raise to create a more dramatic waterfall effect.  

AquaFalls filters are easy to install!  With other biological waterfalls you have to bolt the front lip to the filter then use expanding foam to hold the fake rock lip in place.  The AquaFalls filter has a simulated rock lip built right into the lip so you don't need to mess around with the expandable foam and hiding the edge. Simply bolt the rock lip to the filter and you're done!

AquaFalls are also exceptional in that they offer the landscaper (or of course, the  homeowner too) complete flexibility in the location of attaching the pump tubing to the AquaFalls.  Other units only offer the plumbing attachment in the back but the AquaFalls unit offers an opening on the right AND left side of the unit, making water flow greater and less plumbing "elbows" to deal with (which cuts down water pressure).  Having an opening on both sides of the unit also provides an option to use one opening for a drain while the other opening is used for the inlet of water.    Using an optional drain feature is ideal for cleaning the unit.  Simply let the water run in through one side of the filter and let the dirt and debris go out the other side!   You would need an optional ball valve to attach to the other opening when not draining or cleaning the filter.  Simply keep the valve closed when the AquaFalls is in use and open the valve when you want to clean the filter.  Ball valve not included.  If you decide not to use the second opening, we've included a bulkhead plug which will tightly plug the second opening and stop from any water loss.   Each AquaFalls filter includes an internal filter support stand which keeps the filter pads off the bottom of the filter to prevent plugging.

Use more than one AquaFalls for a truly dynamic waterfall effect!

 

wpe2B.jpg (1659 bytes)

 

 

Small AquaFalls
Provides biofiltration for ponds up to 200 square feet and/or approx. 2500 gallons. Includes two 2" bulkhead fittings allowing you to enter from either the left or right side of the filter.  Filter comes standard with 3 filter pads and 2 mesh bags for filter media (lava rock or bioballs, not included).  18" wide opening for waterfall.  Unit is 26" wide, 26" deep and 26" high.

Product Code:   SCASD
Price:  $329.00

 

 

 

wpe2B.jpg (1659 bytes)

 

Medium AquaFalls
Provides biological filtration for ponds up to 600 square feet and/or approx. 6000 gallons.  Includes two 2" bulkhead fittings allowing you to enter incoming water from either side of the filter.  Filter comes with 3 filter mats and 3 mesh bags for filter media (lava rocks or bioballs, not included).  26" wide waterfall opening.  Unit is 36" wide, 32" deep and 28" high.

Product Code:  SCAMD
Price:  $445.00

 

wpe2B.jpg (1659 bytes)

 

Large AquaFalls
Provides biological filtration for ponds over 700 square feet.  Includes two 3" bulkhead fittings allowing you to enter incoming water from either side of the filter.   Filter comes with 3 filter mats and 6 mesh bags for filter media (lava rocks or bioballs, not included).  Unit has 50" wide waterfall opening,  is 67" wide (backside dimension),  36" deep and 36" high.

Product Code:   SCALD
Price:  $545.00

 

wpe2B.jpg (1659 bytes)

 

 

© 2002 - 2006, Pond and Water Garden Supplies 
All Rights Reserved.

Visit us at 
PondandWaterGardenSupplies.com